If the users are using the TP-link
wireless routers, then they can be configured through tplinkwifi.net. These
webs address www.tplinkwifi.net and the
default IP 192.168.1.1 or 192.168.0.1 can both be used for accessing the admin
setup page of the TP-link router.
This question is asked a number of
times as how to increase the wifi signal connectivity of the TP-link router.
Well, there are some simple ways that can help you increase the wifi strength
of your TP-Link router. These simple hacks have been listed below.
1. Make
sure that your TP-link wireless router is placed at an optimum position in your
home or office.
2. There
should be no physical or even virtual hindrances in between your TP-link router
and the connecting device.
3. Always
try to keep the firmware of your TP-link router updated. Also, it is
recommended that the TP-link router’s firmware should be updated as soon as
possible after its release.
4. There
should be no electrical or electronic radio wave emitting devices near your
wireless router as these devices can interfere in each other’s wireless cover
resulting in the lowered wifi signal connectivity.
What should we do if the wifi signal coverage
of the router is extremely poor?
In case your existing
wireless router tends to deliver the poorest wireless signals and in turn
creating a large number of dead zones, then what you need to do is add a wifi
extender from TP link to your existing wireless router.
Here is how you can set up a
TP-link range repeater with your existing wireless router.
Tp-link range repeater setup- The TP-link range repeater can be set
up with your existing wireless router through one of the three available
methods. These methods are listed below.
v
WPS connection (Push n Connect)
v
Ethernet cable connection
v
Wifi connection
WPS connection- The WPS stands for wifi protected connection that
means it is a safe and secure wireless connection method. The user just needs
to press the WPS button given on the router’s body and then select the WPS
connection option in the internet and settings section of their computer device
or vice versa.
Important- Note that the WPS connection works only with the
wireless networks that support the WPA/WPA2/WPSK and above security types, WPS
connection doesn’t support the WEP security keys.
Ethernet cable connection- Ethernet cable connection is the most
convenient wired connection method. The Ethernet cable should be of RJ45 type
and the modem should be connected into the WAN port and the computer system to
the router’s LAN port.
